\u2022 100% real exam answers and questions
\n\u2022 100% pass guarantee
\n\u2022 Real Simulated Exam Environment
\n\u2022 Free update for dump stability
\n\u2022 SPOTO Dumps\u00a0 with highest accuracy
\n\u2022 Latest Passing Report Feedback
\n\u2022 7\/24 Technical support
\n\u2022 Professional Tutors Teams<\/p>\n
Get 100% Real Exam Answers and Questions!<\/strong><\/h4>\n![\"\"](\"https:\/\/blog.spotodumps.com\/wp-content\/uploads\/2020\/10\/images-300x150.jpg\")
<\/a><\/p>\nCisco CCNP\u00a0300-615\u00a0exam demos in the below:<\/strong><\/p>\nQUESTION 1<\/strong>
\nAn engineer troubleshoots a fabric discovery failure. Which two requirements must an engineer verify about switch connectivity to solve the problem? (Choose two.)<\/strong><\/p>\nA.A Cisco APIC must be attached to a spine node only.
\nB.A Cisco APIC must be attached to leaf nodes.
\nC.Spine nodes must connect to other spine nodes.
\nD.A Cisco APIC must be dual-attached to two separate spine nodes.
\nE.Leaf nodes must connect to spine nodes only.<\/p>\n
Correct Answer: BE<\/strong><\/p>\nQUESTION 2<\/strong>
\nAn engineer removes a VMM domain from an endpoint group called EPG-1, but the distributed port group fails to be deleted. Which action must be taken to resolve the issue?<\/strong><\/p>\nA.Remove the port group manually.
\nB.Migrate all virtual machines in the EPG-1 to different hypervisors.
\nC.Remove the remaining EPGs from the VMM domain.
\nD.Migrate all virtual machines in the EPG-1 to different port groups.<\/p>\n
Correct Answer: C<\/strong><\/p>\nQUESTION 3<\/strong>
\nA fabric interconnect fails to start and the console displays the loader prompt. Which two actions resolve the issue? (Choose two.)<\/strong><\/p>\nA.Load an uncorrupt bootloader image.
\nB.Load an uncorrupt kickstart image.
\nC.Reconnect L1\/L2 cables between the Fis.
\nD.Reformat the fabric interconnect.
\nE.Load the correct version of the boot image.<\/p>\n
Correct Answer: BD<\/strong><\/p>\nQUESTION 4<\/strong>
\nAn upgrade of protected RPMs from the Bash shell does not take effect. Which action resolves this issue?<\/strong><\/p>\nA.Restart the Bash shell.
\nB.Reload the switch.
\nC.Upgrade the RPMs from the Guest shell.
\nD.Disable and reenable the Bash feature.<\/p>\n
Correct Answer: B<\/strong><\/p>\nQUESTION 5<\/strong>
\nA Fibre Channel interface on a Cisco Nexus 5000 Series Switch receives bit errors, and the switch disables the interface. A temporary workaround must be implemented before the root cause is identified. Which action does an engineer take to prevent this issue from reoccurring?<\/strong><\/p>\nA.Verify that the SFPs are supported.
\nB.Change the SFP to operate at 4 Gbps instead of 2 Gbps.
\nC.Run the shutdown and then no shutdown command on the interface.
\nD.Run the switchport ignore bit-errors command on the interface.<\/p>\n
Correct Answer: D<\/strong><\/p>\nQUESTION 6<\/strong>
\nAn engineer is implementing a storage VDC but fails. Which two prerequisites must be in place before a storage VDC is implemented? (Choose two.)<\/strong><\/p>\nA.M-Series module
\nB.ESSENTIALS license
\nC.STORAGE-ENT license
\nD.FCoE license
\nE.F-Series module
\nCorrect Answer: DE<\/strong><\/p>\nQUESTION 7<\/strong>
\nAn engineer is troubleshooting a failed DCBX exchange between a server and a Cisco Nexus switch. Which action allows DCBX to successfully negotiate?<\/strong><\/p>\nA.Enable ETS
\nB.Enable PFC.
\nC.Enable Cisco Discovery Protocol.
\nD.Enable LLDP. Correct<\/p>\n
Answer: D<\/strong>
\nQUESTION 8<\/strong>
\nA server administrator attempts to change the Cisco IMC KVM certificate to one signed by a private CA, but the certificate is not being accepted. What can cause this process to fail?<\/strong><\/p>\nA.using a certificate with a password-protected private key
\nB.RSA encryption being used in the generation of the certificate.
\nC.AES encryption being used in the generation of the certificate.
\nD.public IP address of the Cisco IMC not being included in the SAN.<\/p>\n
Correct Answer: A<\/strong><\/p>\nQUESTION 9<\/strong>
\nA Cisco ACI environment consists of three Cisco APICs, two spine switches, and four-leaf switches. The engineer erases and reboots all APICs first then leaf and spine switches individually, and then completes the Initial Setup dialog on the APIC 1 CIMC KVM console. When the engineer logs into the APIC1 web GUI, the engineer notices that there are no directly connected leaf switches being discovered under Fabric > Inventory > Fabric Membership. What is the cause of the issue?<\/strong><\/p>\nA.The leaf nodes were not erased properly, which caused fabric parameters to mismatch with the APIC1.
\nB.Rebooting the APICs and the leaf and spine switches after wiping them are not required.
\nC.You forgot to enter the TEP Pool value during the Initial Setup dialogue on APIC1.
\nD.The same Fabric Name value should be used before after wiping all devices.<\/p>\n
Correct Answer: C<\/strong><\/p>\nQUESTION 10<\/strong>
\nAn engineer is troubleshooting a custom AV pair that was created by a client on an external authentication server to map a read-only role for a specific security domain. Which AV pair solves the problem?<\/strong><\/p>\nA.shell:domains=Security_Domain_1\/\/Read_Role_1|Read_Role_2
\nB.shell:domains=Security_Domain_1\/Write_Role_1|Read_Role_2
\nC.shell=Security_Domain_1\/Read_Role_1|Read_Role_2
\nD.shell:domains=Security_Domain_1\/Read_Role_1|Read_Role_2<\/p>\n
Correct Answer: A<\/strong><\/p>\nAbout SPOTO<\/strong><\/p>\nFounded in 2003, SPOTO is an outstanding online IT training institute for 17 years. We offer 100% real and verified Cisco CCNA, CCNP, CCIE Lab, PMP, AWS, CISM, CISA, Huawei, and other IT exam practice tests and study materials to help thousands of candidates around the world to pass their IT exams on the 1st try.
\nWith expertise and strength, SPOTO has made cooperation with Cisco, Huawei, Star-Net, and other well-known network equipment suppliers and system integrators at home and abroad. Also, SPOTO has close cooperation with Tencent.com, one of the IT giants in China, and verified as the official IT certification training institute by Tencent Class.<\/p>\n
if you have any questions or want to buy SPOTO dumps, and you can contact us now!<\/strong><\/h3>\n![\"\"](\"https:\/\/blog.spotodumps.com\/wp-content\/uploads\/2020\/09\/Get-100-pass-dump-1-300x70.jpg\")
<\/a><\/p>\nLatest SPOTO Candidates Pass Feedback<\/strong><\/h3>\n
<\/a><\/p>\nCisco CCNP\u00a0300-615\u00a0exam demos in the below:<\/strong><\/p>\n QUESTION 1<\/strong> A.A Cisco APIC must be attached to a spine node only. Correct Answer: BE<\/strong><\/p>\n QUESTION 2<\/strong> A.Remove the port group manually. Correct Answer: C<\/strong><\/p>\n QUESTION 3<\/strong> A.Load an uncorrupt bootloader image. Correct Answer: BD<\/strong><\/p>\n QUESTION 4<\/strong> A.Restart the Bash shell. Correct Answer: B<\/strong><\/p>\n QUESTION 5<\/strong> A.Verify that the SFPs are supported. Correct Answer: D<\/strong><\/p>\n QUESTION 6<\/strong> A.M-Series module QUESTION 7<\/strong> A.Enable ETS Answer: D<\/strong> A.using a certificate with a password-protected private key Correct Answer: A<\/strong><\/p>\n QUESTION 9<\/strong> A.The leaf nodes were not erased properly, which caused fabric parameters to mismatch with the APIC1. Correct Answer: C<\/strong><\/p>\n QUESTION 10<\/strong> A.shell:domains=Security_Domain_1\/\/Read_Role_1|Read_Role_2 Correct Answer: A<\/strong><\/p>\n About SPOTO<\/strong><\/p>\n Founded in 2003, SPOTO is an outstanding online IT training institute for 17 years. We offer 100% real and verified Cisco CCNA, CCNP, CCIE Lab, PMP, AWS, CISM, CISA, Huawei, and other IT exam practice tests and study materials to help thousands of candidates around the world to pass their IT exams on the 1st try.
\nAn engineer troubleshoots a fabric discovery failure. Which two requirements must an engineer verify about switch connectivity to solve the problem? (Choose two.)<\/strong><\/p>\n
\nB.A Cisco APIC must be attached to leaf nodes.
\nC.Spine nodes must connect to other spine nodes.
\nD.A Cisco APIC must be dual-attached to two separate spine nodes.
\nE.Leaf nodes must connect to spine nodes only.<\/p>\n
\nAn engineer removes a VMM domain from an endpoint group called EPG-1, but the distributed port group fails to be deleted. Which action must be taken to resolve the issue?<\/strong><\/p>\n
\nB.Migrate all virtual machines in the EPG-1 to different hypervisors.
\nC.Remove the remaining EPGs from the VMM domain.
\nD.Migrate all virtual machines in the EPG-1 to different port groups.<\/p>\n
\nA fabric interconnect fails to start and the console displays the loader prompt. Which two actions resolve the issue? (Choose two.)<\/strong><\/p>\n
\nB.Load an uncorrupt kickstart image.
\nC.Reconnect L1\/L2 cables between the Fis.
\nD.Reformat the fabric interconnect.
\nE.Load the correct version of the boot image.<\/p>\n
\nAn upgrade of protected RPMs from the Bash shell does not take effect. Which action resolves this issue?<\/strong><\/p>\n
\nB.Reload the switch.
\nC.Upgrade the RPMs from the Guest shell.
\nD.Disable and reenable the Bash feature.<\/p>\n
\nA Fibre Channel interface on a Cisco Nexus 5000 Series Switch receives bit errors, and the switch disables the interface. A temporary workaround must be implemented before the root cause is identified. Which action does an engineer take to prevent this issue from reoccurring?<\/strong><\/p>\n
\nB.Change the SFP to operate at 4 Gbps instead of 2 Gbps.
\nC.Run the shutdown and then no shutdown command on the interface.
\nD.Run the switchport ignore bit-errors command on the interface.<\/p>\n
\nAn engineer is implementing a storage VDC but fails. Which two prerequisites must be in place before a storage VDC is implemented? (Choose two.)<\/strong><\/p>\n
\nB.ESSENTIALS license
\nC.STORAGE-ENT license
\nD.FCoE license
\nE.F-Series module
\nCorrect Answer: DE<\/strong><\/p>\n
\nAn engineer is troubleshooting a failed DCBX exchange between a server and a Cisco Nexus switch. Which action allows DCBX to successfully negotiate?<\/strong><\/p>\n
\nB.Enable PFC.
\nC.Enable Cisco Discovery Protocol.
\nD.Enable LLDP. Correct<\/p>\n
\nQUESTION 8<\/strong>
\nA server administrator attempts to change the Cisco IMC KVM certificate to one signed by a private CA, but the certificate is not being accepted. What can cause this process to fail?<\/strong><\/p>\n
\nB.RSA encryption being used in the generation of the certificate.
\nC.AES encryption being used in the generation of the certificate.
\nD.public IP address of the Cisco IMC not being included in the SAN.<\/p>\n
\nA Cisco ACI environment consists of three Cisco APICs, two spine switches, and four-leaf switches. The engineer erases and reboots all APICs first then leaf and spine switches individually, and then completes the Initial Setup dialog on the APIC 1 CIMC KVM console. When the engineer logs into the APIC1 web GUI, the engineer notices that there are no directly connected leaf switches being discovered under Fabric > Inventory > Fabric Membership. What is the cause of the issue?<\/strong><\/p>\n
\nB.Rebooting the APICs and the leaf and spine switches after wiping them are not required.
\nC.You forgot to enter the TEP Pool value during the Initial Setup dialogue on APIC1.
\nD.The same Fabric Name value should be used before after wiping all devices.<\/p>\n
\nAn engineer is troubleshooting a custom AV pair that was created by a client on an external authentication server to map a read-only role for a specific security domain. Which AV pair solves the problem?<\/strong><\/p>\n
\nB.shell:domains=Security_Domain_1\/Write_Role_1|Read_Role_2
\nC.shell=Security_Domain_1\/Read_Role_1|Read_Role_2
\nD.shell:domains=Security_Domain_1\/Read_Role_1|Read_Role_2<\/p>\n
\nWith expertise and strength, SPOTO has made cooperation with Cisco, Huawei, Star-Net, and other well-known network equipment suppliers and system integrators at home and abroad. Also, SPOTO has close cooperation with Tencent.com, one of the IT giants in China, and verified as the official IT certification training institute by Tencent Class.<\/p>\nif you have any questions or want to buy SPOTO dumps, and you can contact us now!<\/strong><\/h3>\n
<\/a><\/p>\nLatest SPOTO Candidates Pass Feedback<\/strong><\/h3>\n