{"id":3859,"date":"2022-04-08T17:08:25","date_gmt":"2022-04-08T09:08:25","guid":{"rendered":"https:\/\/blog.spotodumps.com\/?p=3859"},"modified":"2022-04-08T17:08:25","modified_gmt":"2022-04-08T09:08:25","slug":"dont-miss-2022-latest-ccna-exam-dumps-based-on-100-authentic-questions","status":"publish","type":"post","link":"https:\/\/blog.spotodumps.com\/index.php\/2022\/04\/08\/dont-miss-2022-latest-ccna-exam-dumps-based-on-100-authentic-questions\/","title":{"rendered":"Don’t Miss 2022 Latest CCNA Exam Dumps Based on 100% Authentic Questions"},"content":{"rendered":"

There has been a recent update to the CCNA 200-301 test. This most recent set of CCNA 200-301 test questions has been produced by SPOTO<\/a><\/em><\/strong> IT professionals to help you learn the most up-to-date exam topics.<\/p>\n

CCNA 200-301 exam practice questions<\/a><\/em><\/strong> are provided here for you to use as a guide. A single success in the CCNA 200-301 exam will provide you with extra genuine questions. Let’s try the ten questions below!<\/p>\n

\"get<\/a><\/h3>\n

Question 1<\/h3>\n

 <\/p>\n

You want to change the amount of time it takes for a hello packet to not be received before a router is declared offline. Which setting do you need to change?<\/strong><\/p>\n

 <\/p>\n

A. Hello interval<\/p>\n

B. Attempt<\/p>\n

C. Exchange<\/p>\n

D. Dead interval<\/p>\n

 <\/p>\n

Correct answer:<\/strong> C<\/strong><\/p>\n

 <\/p>\n

Question 2<\/span><\/p>\n

 <\/p>\n

You need to verify that time is synchronized on a router. Which commands could you use to do this? (Choose two; each response is a complete solution)<\/strong><\/p>\n

 <\/p>\n

A. feature ntp<\/p>\n

B. clock summer-time < zone ><\/p>\n

C. ntp server < address ><\/p>\n

D. show ntp status<\/p>\n

E. show ntp associations<\/p>\n

 <\/p>\n

Correct answer:<\/strong> D<\/strong><\/p>\n

 <\/p>\n

Question 3<\/h3>\n

 <\/p>\n

Consider the following log message generated\u00a0by a router:*00019: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0\/0, changed state to down What is being used to identify when the message is generated?<\/strong><\/p>\n

 <\/p>\n

A. Sequence number<\/p>\n

B. Facility<\/p>\n

C. Mnemonic<\/p>\n

D. Timestamp<\/p>\n

 <\/p>\n

Correct answer: A<\/strong><\/p>\n

 <\/p>\n

Question 4<\/h3>\n

 <\/p>\n

What happens to the history table and log files when the device loses power?<\/strong><\/p>\n

 <\/p>\n

A. The history table and log files are all lost.<\/p>\n

B. Everything is retained in the system memory.<\/p>\n

C. The history table remains, but log files are lost.<\/p>\n

D. The history table is cleared, but the logs remain.<\/p>\n

 <\/p>\n

Correct answer: C<\/strong><\/p>\n

\"get\u00a0<\/a><\/p>\n

Question 5<\/h3>\n

 <\/p>\n

You have a DHCP server on your network. Which of the following is the correct order of DHCP messages exchanged between a client and server when the client obtains an IP address using a 4-way handshake?<\/strong><\/p>\n

 <\/p>\n

A. DHCPREQUEST, DHCPOFFER, DHCPDISCOVER, DHCPACK<\/p>\n

B. DHCPREQUEST, DHCPOFFER, DHCPACK, DHCPDISCOVER<\/p>\n

C. DHCPDISCOVER, DHCPOFFER, DHCPREQUEST, DHCPACK<\/p>\n

D. DHCPACK, DHCPREQUEST, DHCPDISCOVER, DHCPOFFER<\/p>\n

E. DHCPOFFER, DHCPREQUEST, DHCPDISCOVER, DHCPACK<\/p>\n

 <\/p>\n

Correct answer: A<\/strong><\/p>\n

 <\/p>\n

Question 6<\/h3>\n

 <\/p>\n

A switch running STP is a backup bridge. What state is it in?<\/strong><\/p>\n

 <\/p>\n

A. Learning<\/p>\n

B. Disabled<\/p>\n

C. Forwarding<\/p>\n

D. Listening<\/p>\n

E. Blocking<\/p>\n

 <\/p>\n

Correct answer: E<\/strong><\/p>\n

 <\/p>\n

Question 7<\/h3>\n

 <\/p>\n

A configured threshold has been exceeded by a network host that is being monitored by an SNMP agent. The agent sends a trap to its SNMP manager with a notification that the threshold has been exceeded. Which IP port does the agent use to send the trap?<\/strong><\/p>\n

 <\/p>\n

A. 162<\/p>\n

B.161<\/p>\n

C. 123<\/p>\n

D. 80<\/p>\n

E. 389<\/p>\n

 <\/p>\n

Correct answer:<\/strong> D<\/strong><\/p>\n

 <\/p>\n

Question 8<\/h3>\n

 <\/p>\n

You have implemented a QoS model where each application must request network resources. The router will approve or deny the request based on available resources. Which QoS model is being used?<\/strong><\/p>\n

 <\/p>\n

A. Differentiated Services<\/p>\n

B. Classification and Marking<\/p>\n

C. Best Effort<\/p>\n

D. Integrated Services<\/p>\n

 <\/p>\n

Correct answer: C<\/strong><\/p>\n

 <\/p>\n

Question 9<\/h3>\n

 <\/p>\n

You check the time on a router and find that it is out of sync with the time on the other routers and switches in your network. To fix this issue, you decide to configure NTP on the router to get time from an internal authoritative (master) NTP server with an IP address of 172.17.8.254. Which command should you use?<\/strong><\/p>\n

 <\/p>\n

A. ntp server 172.17.8.254<\/p>\n

B. feature ntp 172.17.8.254<\/p>\n

C. ntp status<\/p>\n

D. ntp master 172.17.8.254<\/p>\n

 <\/p>\n

Correct answer: D<\/strong><\/p>\n

 <\/p>\n

Question 10<\/h3>\n

 <\/p>\n

What is the first step when troubleshooting a serial link?<\/strong><\/p>\n

 <\/p>\n

A. Use Telnet to verify Application level connectivity<\/p>\n

B. Isolate the fault domain<\/p>\n

C. Verify TCP\/IP connectivity<\/p>\n

D. Check the interface status<\/p>\n

 <\/p>\n

Correct answer: B<\/strong><\/p>\n

Take advantage of SPOTO’s 100% genuine CCNA exam dumps<\/a><\/em><\/strong> or enroll in the course for CCNA certification success on your first attempt! If you want to pass the CCNA exam with ease, use SPOTO<\/a><\/em><\/strong> CCNA exam practice tests! With our CCIE teachers’ help, you’ll master the most up-to-date networking skills needed for an IT career!<\/p>\n

\"get<\/a><\/p>\n

Latest SPOTO Candidates Pass Feedback<\/strong><\/h2>\n