{"id":4105,"date":"2022-06-13T13:28:13","date_gmt":"2022-06-13T05:28:13","guid":{"rendered":"https:\/\/blog.spotodumps.com\/?p=4105"},"modified":"2022-06-13T13:28:13","modified_gmt":"2022-06-13T05:28:13","slug":"spoto-ccna-exam-the-biggest-collection-of-practice-tests-dumps","status":"publish","type":"post","link":"https:\/\/blog.spotodumps.com\/index.php\/2022\/06\/13\/spoto-ccna-exam-the-biggest-collection-of-practice-tests-dumps\/","title":{"rendered":"SPOTO CCNA Exam \u2013 The Biggest Collection of Practice Tests Dumps"},"content":{"rendered":"

The SPOTO CCNA practice exams DUMPS<\/a> receive regular updates that are based on the most recent topics covered by each certification. Our subject matter specialists have reviewed and validated the majority of the practice test questions.<\/p>\n

\"get<\/a><\/p>\n

Question 1<\/strong><\/h3>\n

 <\/p>\n

What best describes the destination IPv4 address that is used by multicasting?<\/strong><\/p>\n

 <\/p>\n

A. a single IP multicast address that is used by all destinations in a group<\/p>\n

B. an IP address that is unique for each destination in the group<\/p>\n

C. a group address that shares the last 23 bits with the source IPv4 address<\/p>\n

D. a 48 bit address that is determined by the number of members in the multicast group<\/p>\n

 <\/p>\n

Correct answer: A<\/strong><\/p>\n

 <\/p>\n

\u00a0Question 2<\/strong><\/p>\n

 <\/p>\n

\u00a0In an Ethernet network, when a device receives a frame of 1200 bytes, what will it do?<\/strong><\/p>\n

 <\/p>\n

A. drop the frame<\/p>\n

B. process the frame as it is<\/p>\n

C. send an error message to the sending device<\/p>\n

D. add random data bytes to make the frame 1518 bytes long and then forward it<\/p>\n

 <\/p>\n

Correct answer:\u00a0 B<\/strong><\/p>\n

 <\/p>\n

\u00a0Question 3<\/strong><\/p>\n

 <\/p>\n

What important information is examined in the Ethernet frame header by a Layer 2 device in order to forward the data onward?<\/strong><\/p>\n

 <\/p>\n

A. source MAC address<\/p>\n

B. source IP address<\/p>\n

C. destination MAC address<\/p>\n

D. Ethernet type<\/p>\n

E. destination IP address<\/p>\n

 <\/p>\n

Correct answer: C<\/strong><\/p>\n

 <\/p>\n

\u00a0Question 4<\/strong><\/p>\n

 <\/p>\n

What will a Layer 2 switch do when the destination MAC address of a received frame is not in the MAC table?<\/strong><\/p>\n

 <\/p>\n

A. It initiates an ARP request.<\/p>\n

B. It broadcasts the frame out of all ports on the switch.<\/p>\n

C. It notifies the sending host that the frame cannot be delivered.<\/p>\n

D. It forwards the frame out of all ports except for the port at which the frame was received.<\/p>\n

 <\/p>\n

Correct answer: D<\/strong><\/p>\n

 <\/p>\n

\"get<\/a><\/p>\n

\u00a0<\/strong><\/h3>\n

\u00a0Question 5<\/strong><\/p>\n

 <\/p>\n

What are two features of ARP? (Choose two.)<\/strong><\/p>\n

 <\/p>\n

If a host is ready to send a packet to a local destination device and it has the IP address but not the MAC address of the destination, it generates an ARP broadcast.<\/strong><\/p>\n

A. An ARP request is sent to all devices on the Ethernet LAN and contains the IP address of the destination host and its multicast MAC address.<\/p>\n

B. When a host is encapsulating a packet into a frame, it refers to the MAC address table to determine the mapping of IP addresses to MAC addresses.<\/p>\n

C. If no device responds to the ARP request, then the originating node will broadcast the data packet to all devices on the network segment.<\/p>\n

D. If a device receiving an ARP request has the destination IPv4 address, it responds with an ARP reply.<\/p>\n

 <\/p>\n

Correct answer: AE<\/strong><\/p>\n

 <\/p>\n

\u00a0Question 6<\/strong><\/p>\n

 <\/p>\n

\u00a0Which two services are required to enable a computer to receive dynamic IP addresses and access the Internet using domain names? (Choose two.)<\/strong><\/p>\n

 <\/p>\n

A. DNS<\/p>\n

B. WINS<\/p>\n

C. HTTP<\/p>\n

D. DHCP<\/p>\n

E. SMTP<\/p>\n

 <\/p>\n

Correct answer: AD<\/strong><\/p>\n

 <\/p>\n

\u00a0Question 7<\/strong><\/p>\n

 <\/p>\n

What is a basic characteristic of the IP protocol?<\/strong><\/p>\n

 <\/p>\n

A. connectionless<\/p>\n

B. media dependent<\/p>\n

C. user data segmentation<\/p>\n

D. reliable end-to-end delivery<\/p>\n

 <\/p>\n

Correct answer: A<\/strong><\/p>\n

 <\/p>\n

\u00a0Question 8<\/strong><\/p>\n

 <\/p>\n

\u00a0What is the valid most compressed format possible of the IPv6 address 2001:0DB8:0000:AB00:0000:0000:0000:1234?<\/strong><\/p>\n

 <\/p>\n

A. 2001:DB8:0:AB00::1234<\/p>\n

B. 2001:DB8:0:AB::1234<\/p>\n

C. 2001:DB8::AB00::1234<\/p>\n

D. 2001:DB8:0:AB:0:1234<\/p>\n

 <\/p>\n

Correct answer: A<\/strong><\/p>\n

 <\/p>\n

\u00a0Question 9<\/strong><\/p>\n

 <\/p>\n

At a minimum, which address is required on IPv6-enabled interfaces?<\/strong><\/p>\n

 <\/p>\n

A. link-local<\/p>\n

B. unique local<\/p>\n

C. site local<\/p>\n

D. global unicast<\/p>\n

 <\/p>\n

Correct answer: A<\/strong><\/p>\n

 <\/p>\n

\u00a0Question 10<\/strong><\/p>\n

 <\/p>\n

\u00a0An IPv6 enabled device sends a data packet with the destination address of FF02::2. What is the target of this packet?<\/strong><\/p>\n

 <\/p>\n

A. all IPv6 enabled devices across the network<\/p>\n

B. all IPv6 enabled devices on the local link<\/p>\n

C. all IPv6 DHCP servers<\/p>\n

D. all IPv6 configured routers on the local link<\/p>\n

 <\/p>\n

Correct answer: D<\/strong><\/p>\n

In addition, we provide a variety of test dumps and free exam samples. If you don’t understand the meaning of the correct answers, you can get in touch with SPOTO<\/a><\/em><\/strong>. Our tutors will provide you with the most comprehensive explanation. Please contact us as soon as possible!<\/p>\n

\"get<\/a><\/p>\n

Latest SPOTO Candidates Pass Feedback<\/strong><\/h2>\n