New 2020 CCNP 300-415 ENSDWI exam questions from SPOTO 300-415 demos! Welcome to download the newest SPOTO 300-415 exam demos.
| Categories | Exam Code | 100% Pass Dumps |
|---|---|---|
| CCNP Data Center | 350-601 DCCOR |  |
| 300-610 DCID | |
|
| 300-615 DCIT | |
|
| 300-620 DCACI | |
|
| 300-625 DCSAN | |
|
| 300-635 DCAUTO | |
|
| 350-601 DCCOR | |
NEW QUESTION 1
When redistribution is configured between OMP and BGP at two Data Center sites that have Direct Connection Interlink, which step avoids learning the same routes on WAN Ede routers of the DCs from LAN?
A. Set down-bit on Edge routes on DC1.
B. Define different VRFs on both DCs.
C. Set OMP admin distance lower than BGP admin1 distance.
D. Set the same over AS on both DC WAN Edge routers.
Answer: B
NEW QUESTION 2
In the Cisco SD_WAN solution, the vSmart controller is responsible for which two actions? (Choose two.)
A. Distribute crypto key information among vEdge routers.
B. Configure and monitor vEdge routers.
C. Authenticate and authorize vEdge routers.
D. Distribute the IP address from the DHCP server to vEdge routers.
E. Distribute route and policy information via OMP.
Answer: BD
NEW QUESTION 3
A network administrator is configuring QoS on the vEdge 5000 routers and needs to enable it on the transport side interface. Which policy setting must be selected to accomplish this goal?
A. Application
B. Netflow
C. Cloud QoS Service side
D. Cloud QoS
Answer: C
NEW QUESTION 4
In an AWS cloud, which feature provision WAN Edge routers automatically in Cisco SD-WAN?
A. Cloud app
B. Cloud OnRamp
C. vAnalytics
D. Network Designer
Answer: C
NEW QUESTION 5
What is the purpose of ”VPN 0” in the configuration template when onboarding a WAN edge node?
A. It carries control traffic over secure DTLS or TLS connections between vSmart controllers and vEdge routers, and between vSmart and vBond.
B. It carries control out-of-band network management traffic among the Vlptela devices in the overlay network.
C. It carries control traffic over secure IPsec connections between vSmart controllers and vEdge routers, and between vSmart and manager.
D. It carries control traffic over secure DTLS or TLS connections between vSmart controllers and vEdge E. routers, and between vSmart and vBond.
Answer: B
NEW QUESTION 6
Which device in the SD-WAN solution receives and categorizes event reports, and generates alarms?
A. WAN Edge routers
B. vSmart controllers
C. vManage NMS
D. vBond controllers
Answer: D
NEW QUESTION 7
A network administrator is bringing up one WAN Edge for branch connectivity. Which types of tunnels form when the WAN edge router connects to the SD-WAN fabric?
A.DTLS or TLS tunnel with vBond controller and IPsec tunnel with vManage controller.
B. DTLS or TLS tunnel with vBond controller and IPsec tunnel with other WAN Edge routers.
C. DTLS or TLS tunnel with vSmart controller and IPsec tunnel with other Edge routers.
D. DTLS or TLS tunnel with vSmart controller and IPsec tunnel with vBond controller.
Answer: A
NEW QUESTION 8
When a WAN Edge device joins the SD-WAN overlay, which Cisco SD-WAN components orchestrate the connection between the WAN Edge device and a vSmart controller?
A. vManage
B. vBond
C. OMP
D. APIC-EM
Answer: C
NEW QUESTION 9
Which component of the Cisco SD-WAN secure extensible network provides a single pane of glass approach to network monitoring and configuration?
A. APIC-EM
B. vSmart
C. vManage
D. vBond
Answer: B
NEW QUESTION 10
What is the benefit of the application-aware firewall feature in the Cisco SD-WAN solution?
A. application malware protection
B. control policy enforcement
C. application monitoring
D. application visibility
Answer: D
NEW QUESTION 11
An administrator needs to configure SD-WAN to divert traffic from the company’s private network to an ISP network. What action should be taken to accomplish this goal?
A. configure the control policy
B. configure the data policy
C. configure the data security policy
D. configure the application-aware policy
Answer: B
NEW QUESTION 12
A network administrator is configuring an application-aware firewall between inside zones to an outside zone on a WAN edge router using vManage GUI. What kind of Inspection is performed when the ”inspect” action is used?
A. stateful inspection for TCP and UDP
B. stateful inspection for TCP and stateless inspection of UDP
C. IPS inspection for TCP and-Layer 4 inspection for UDP
D. Layer 7 inspection for TCP and Layer 4 inspection for UDP
Answer: A
NEW QUESTION 13
In Cisco SD-WAN, what protocol is used for control connections between SD-WAN devices?
A. DTLS
B. OMP
C. BGP
D. OSPF
Answer: B
Finally, if you want to get more exam demos that cover all real exam answers and questions, and you can follow SPOTO. we have various exam dumps! Welcome to join SPOTO.
Why Choose SPOTO Exam Dumps?
Benefits of Choosing SPOTO CCNP Exam Dumps!
- 100% Passing Rate
- Timely Updated Exam Dumps
- Completely Coverage of Real Exam
- Real Simulated Exam Environment
- 24h Professional Tutors Instruction
- High-score Passing Guarantee
- Latest Passing Report Feedback
- Professional Service Team
Comments