SPOTO updates the new 2020 CCIE /CCNP 350-601 DCCOR exam demos for all candidates! we have various exam answers and questions that cover all real exams! we have helped millions of candidates get their certificate! SPOTO is a trusted IT training institute in the world! if you have any questions, and you can contact us directly!

Good News: SPOTO Double 11 Sale comes! more discounts on sale! more details to read our article:

SPOTO Double 11 Promotion: Enjoy Lowest Discounts on All Cisco, CCIE LAB, PMP, CISA, AWS, etc. Exam Dumps That Same as Black Friday!

CategoriesExam Code100% Pass Dumps
CCNP Data Center350-601 DCCOR
300-610 DCID
300-615 DCIT
300-620 DCACI
300-625 DCSAN
300-635 DCAUTO
350-601 DCCOR

Top 8 Benefits of Choosing CCNP  Exam Dumps!

• 100% Real Exam Answers and Questions
• 100% Pass Guarantee
• Real Simulated Exam Environment
• Free Update for Dump Stability
• SPOTO Dumps  with Highest Accuracy
• Latest Passing Report Feedback
• 7/24 Technical Support
• Professional Tutors Teams

Get 100% Real SPOTO CCNP Exam Practice Tests!

NEW QUESTION 1
Which three firmware packages are included in the Cisco UCS C-Series Rack-Mount UCS-Managed Server Software bundle? (Choose three.)
A. CIMC
B. board controller
C. system
D. third-party
E. BIOS
F. adapter
Answer: ABE

NEW QUESTION 2
The FCoE technology is used in a data center and the MDS switches are configured as Fibre Channel Forwarders. What configuration should be applied to an MDS switch in order to be used as the best switch to connect by the CNAs in the fabric?
A. fcoe FCF-priority 1024
B. fcoe FCF-priority 512
C. fcoe fcf-priority 0
D. no FCoE FCF-priority
Answer: C

NEW QUESTION 3
A UCS B-Series server located in B5108 chassis 1 slot 1 is currently unavailable. The server needs to be associated with a specific service profile when it becomes available. Which associate service profile option should be selected to accomplish this goal?
A. server pool
B. server
C. custom server
D. restrict migration
Answer: B

NEW QUESTION 4
Which event is expected during the direct upgrade of Cisco UCS Manager firmware?
A.The I/O Module reboots immediately after the firmware is activated.
B. All users logged in to the UCSM are logged out, and their sessions end.
C. Data traffic is disrupted for a single fabric interconnect setup.
D. IPMI polling is interrupted.
Answer: D

NEW QUESTION 5
An engineer is configuring AAA authentication on an MDS 9000 switch. The LDAP server is located under the IP 10.10.2.2. The data sent to the LDAP server should be encrypted. Which command should be used to meet these requirements?
A. Idap-server host 10.10.2.2 enable-SSL
B. LDAP-server 10.10.2.2 port 443
C. LDAP server host 10.10.2.2 key SSL_KEY
D. LDAP-server 10.10.2.2 key SSL_KEY
Answer: A

NEW QUESTION 6
An engineer is implementing OTV on a transport that supports multicast. The solution needs to meet the following requirements:
– Establish adjacency to the remote peer by using multicast.
– Enable OTV advertisements for VLAN 100 to the other site.
Which two commands should be configured to meet these requirements? (Choose two.)
A. otv site-VLAN 100
B. otv data-group 232.2.2.0/28
C. otv use-adjacency-server 172.27.255.94
D. otv extend-VLAN 100
E. otv control-group 232.1.1.1
Answer: BE

NEW QUESTION 7
An engineer needs to install a new package on a Cisco Nexus 9000 Series Switch. What is the impact of running the install commit <filename> command on the switch?
A. The switch is restarted after the upgrade is complete.
B. The package is used after the switch is restarted.
C. The package is used in the running configuration.
D. The previous package that was in use is deleted from boot flash.
Answer: B

NEW QUESTION 8
An engineer needs a utility to translate traditional Nexus CLI inputs and generate Python code using XML and JSON message formats. The solution needs to be available on a Nexus 7700 series switch. Which utility should be used?
A. NX-OS JSON-RPC
B. NX-API Sandbox
C. Guest Shell for NX-OS
D. Open NX-OS
Answer: B

NEW QUESTION 9
Which statement describes monitoring Fibre Channel traffic on a Cisco UCS 6332 Fabric Interconnect?
A. Fibre Channel traffic is monitored only on one vHBA per server.
B. The destination port for monitoring must be an unassigned Fibre Channel port.
C. The monitoring of Fibre Channel traffic is limited to the default VSAN.
D. Fibre Channel traffic is capable to be monitored as it is encapsulated as FCoE.
Answer: D

NEW QUESTION 10
What are the two recommended design choices in a topology for multipathing iSCSI traffic? (Choose two.)
A. two NICs bonded together on the initiator
B. dual initiators to a single target with bonded interfaces
C. initiators and targets in separate subnets
D. dual initiators to dual targets
E. single initiator to dual targets
Answer: BC

NEW QUESTION 11
Which two actions should be taken before an upgrade is started on a Cisco MDS switch? (Choose two.)
A. check the impact of the upgrade using the show install all impact command
B. disable Cisco Fabric Services
C. back up the configuration
D. free up space on the USB3 device by deleting old Cisco NX-OS image files
E. make the primary supervisor the active supervisor
Answer: AC

NEW QUESTION 12
An engineer is configuring a vHBA template in UCS Manager. The engineer needs to specify the logical addresses used by the vHBA and the path through which the SAN traffic flows. Which two resources must be specified in the vHBA template? (Choose two.)
A. MAC addresses
B. WWPNPool
C. WWNN
D. VLAN ID
E. Fabric ID
Answer: CE

NEW QUESTION 13
A network engineer repeatedly saves a configuration on Catalyst switches to NVRAM using the write memory command. What action should be taken to implement the same action on Nexus switches?
A. Use the write memory command to save the configuration.
B. Use the alias command to use the write memory command.
C. Use the exit command to leave the configuration mode and save the configuration automatically.
D. Use the write command to use the copy running-config startup-config command.
Answer: B
NEW QUESTION 14
An engineer updated the firmware on Fabric Interconnects and activates it. However, the endpoint fails to boot from the new firmware image. What is expected to occur in this case?
A. The system defaults to the backup image version.
B. The system defaults to and boots into the GOLD firmware image.
C. The system defaults to the GOLD firmware image.
D. The system defaults to and boots into kickstart image.
Answer: A

NEW QUESTION 15
An engineer needs to create a new user in the local user database on the Cisco UCS Fabric Interconnect. The user needs permissions to change the following configuration inside UCS Manager version 3.1:
– vNIC and vHBA profiles
– Fan speed and power redundancy profile of UCS Manager
Which two roles must be assigned to a user to achieve this goal? (Choose two.)
A. server-compute
B. facility-manager
C. operations
D. server-equipment
E. server-profile
Answer: AD

NEW QUESTION 16
Which MAC address is an HSRP version 2?
A. 0100.5E7F.FFFF
B. 3799.9943.3000
C. 0000.0C9F.F0C8
D. 0000.OC07.AC1H
Answer: D

To Sum up, we will updates the exam demos regularly, and you can follow SPOTODUMPS!

Latest SPOTO Candidates Pass Feedback 

Last modified: 2021-01-05

Author

Comments

Write a Reply or Comment

Your email address will not be published.