Constantly, a growing number of students enroll in Cisco’s CCNA program. The Cisco Certified Network Associate (CCNA) is one of the best and most well-respected IT security certifications available. It is an associate-level certificate in IT networking that helps applicants advance in their careers by providing better employment and greater compensation. It verifies that a person has the knowledge and skills to set up, configure, operate, and troubleshoot local area networks (LANs), wide area networks (WANs), and wireless networks utilizing classic copper-based Ethernet and newer technologies.This section is intended to assist students in preparing for their CCNA certification; we’ve included some tips, methods, and important information to assist you in learning how to prepare and study for the CCNA. Contact SPOTO right away if you’d like to learn more about the CCNA certification series, as well as other relevant IT knowledge.
The CCNA certification is the most recent entry-level Cisco certification, and it forms the foundation of the Cisco Certification route. This certification is important for Network Administrators, but it’s also important for other IT workers.
The Cisco Certified Network Associate (CCNA) certification is for IT professionals who wish to enhance their careers as network technicians or engineers and gain valuable knowledge of a wide range of network equipment. It takes a lot of preparation to pass the Cisco 200-301 test. As a result, we’ve compiled a list of study tips to assist you in getting a decent mark. They are as follows:
1. Become familiar with the topics and syllabus
CCNA topics include:
IP connection (25%): This course will test your knowledge and skills in configuring, testing, and troubleshooting basic routing utilizing various routing protocols, such as static IP/VPN/DMZ routes. BGP, vRouter, dynamic routing protocols (RIPv1 and RIPv2), OSPF V3, EIGRP configuration, verification, troubleshooting, and route redistribution utilizing policy-based and tag-based routing will all be covered.
Students will need to understand how to install and troubleshoot VLANs, Interswitch connection, Layer 2 discovery protocols, EtherChannel, and the Rapid Spanning Tree Protocol (20 percent). Students’ understanding of Cisco wireless architecture, AP modes, physical WLAN components, AP and WLC management access connections, and wireless LAN access will also be assessed.
Connecting switches to a switch trunk; creating network topologies; physical interfaces and cabling kinds; IP setup and settings; IP parameters make up 20% of the exam. Wireless principles, virtualization ideas, cloud connectivity, and WAN configuration are all covered in this course.
Security basics (15%) include security management, access control, data center security measures, physical access controls, password limitations, access control lists, Layer 2 security features, and wireless transmission protocols, to name a few.
IP services (10%): Covers all you need to know about NAT and NTP, as well as DHCP, DNS, SNMP, and Syslog features; per-hop behavior; SSH; and TFTP/FTP descriptions.
Look at many types of networks vs controller-based networks, automation concepts, and JSON data analysis to see how automation and programmability (10%) compare.
It’s critical to keep in mind that the test might cover a wide range of subjects. Keep in mind that the test might include a variety of areas. The number of questions asked may vary, but it is most likely to be between 90 and 110. You’ll have 120 minutes to answer all of the questions in the CCNA test.
2. Acquire both theoretical and practical knowledge
While this may not be a possibility for everyone, as the CCNA has no prerequisites, it is still a good idea to obtain some networking experience. This will give you a leg up on other students who have little to no understanding of the subject matter at hand, and it will also assist to calm your nerves since everyone feels apprehensive during testing scenarios!
As you prepare for the test, you should apply theoretical knowledge to real-world troubleshooting and networking challenges. To pass the CCNA test, you’ll need both practical and theoretical understanding. It’s general knowledge that IP is unstable, but the real issue is determining alternate communication options between nodes via IP.
3. Setting Up A Study Routine
Many people do not stick to a study routine, and as a result, they waste their time. You need to get started on one as soon as feasible. For novices, a decent CCNA test study strategy might include reading Cisco Press books on the subject as well as additional learning materials like official Cisco webinars.
You can also consider taking an online course for this. On websites like SPOTO, you may join up for a CCNA boot camp, which will give you some useful study material to aid your CCNA certification exam preparation.
4. Brush Up on Your Skills Right Before the Exam
Before your planned test date, we recommend reviewing the Cisco Press books. This can help you refresh your memory and identify anything you may have missed the first time.
The final several weeks leading up to the certification exam should be spent exclusively on NWExam.com, answering CCNA questions. As you can see, you may look for new information by checking Internet forums and other mock test websites. For your final CCNA test preparation, however, SPOTO may be the finest option.
5. Obtain the Appropriate Study Resources
Cisco books, such as Cisco CCENT/CCNA ICND1 and CCNA Routing and Switching ICND2, are the ideal study tools for the CCNA test.
Another nice option is the “31 Days Before” series, which is also published by Cisco Press. Make sure you finish all of the practice questions and labs. However, before you start reading the books listed above, study binary math—you should be able to do it in your sleep. It will be easier to pass the exam if you have this information.
6. Become a Cisco Training Program participant
Signing up for Cisco’s “Implementing and Administering Cisco Solutions (CCNA)” training program is the best way to prepare for the CCNA test. It includes lectures, hands-on laboratories, and self-study resources that span the whole CCNA curriculum.
Learning from people that are similar to you is also a wonderful way to prepare for an interview. Join the community to participate in the discussions and share your thoughts with your peers.
Conclusion
You’ll be able to showcase yourself as a networking expert—with worldwide acceptance—if you earn the CCNA certification. The certification proves that you know more than your colleagues who aren’t certified. SPOTO will give you more information and materials, and you won’t regret to give it a try!
Comments